弊社は行き届いたサービスを提供します
お客様に利便性を提供するために、弊社は全日24時間でお客様のIBMのC4040-121模擬問題集に関するお問い合わせを待っています。それに、弊社はお客様の皆様の要求に満たすために、C4040-121問題集の三種類のバーションを提供します。お客様は自分の愛用するバーションを入手することができます。
それだけでなく、我々は最高のアフターサービスを提供します。その一、我々は一年間の無料更新サービスを提供します。すなわち、C4040-121問題集をご購入になってからの一年で、我々MogiExamは無料の更新サービスを提供して、お客様の持っているC4040-121 － Virtualization Technical Support for IBM i -v1模擬試験は最新のを保証します。この一年間、もしC4040-121模擬問題集が更新されたら、弊社はあなたにメールをお送りいたします。
その二、お客様に安心で弊社のC4040-121模擬試験を利用するために、我々は「試験に失敗したら、全額で返金します。」ということを承諾します。もしお客様はC4040-121認定試験に合格しなかったら、我々はIBMC4040-121問題集の費用を全額であなたに戻り返します。だから、ご安心ください
IBM C4040-121試験問題集をすぐにダウンロード：成功に支払ってから、我々のシステムは自動的にメールであなたの購入した商品をあなたのメールアドレスにお送りいたします。（12時間以内で届かないなら、我々を連絡してください。Note：ゴミ箱の検査を忘れないでください。）
弊社は無料でC4040-121問題集のサンプルを提供します
受験者としてのあなたにC4040-121認定試験に合格することができるために、我々のITの専門家たちが日も夜も努力して、最高のC4040-121模擬問題集を開発します。数年以来の努力を通して、今まで、弊社は自分のC4040-121試験問題集に自信を持って、弊社の商品で試験に一発合格できるということを信じています。
長時間の努力で開発されているC4040-121模擬試験はMogiExamの受験者にヘルプを提供するという目標を叶うための存在ですから、的中率が高く、権威的で、内容が全面的です。我々のC4040-121模擬問題集（Virtualization Technical Support for IBM i -v1）を利用すると、C4040-121認定の準備をする時に時間をたくさん節約することができます。
信じられないなら、我々のサイトで無料なサンプルを利用してみることができます。お客様に弊社のC4040-121模擬問題集の質量と3つのバーションの機能を了解するために、我々は3つのバーションのIBMのC4040-121のサンプルを無料で提供します。お客様は弊社のサイトでダウンロードすることができます。
IBM C4040-121 試験シラバストピック:
| セクション | 目標 |
|---|---|
| トピック 1: ネットワークとI/Oの仮想化 | - I/Oリソースの仮想化
|
| トピック 2: IBM i仮想化の基礎 | - IBM iのアーキテクチャと仮想化の概念
|
| トピック 3: トラブルシューティングとサポート | - システムの復旧と保守
|
| トピック 4: システム管理と設定 | - 区画の管理
|
IBM Virtualization Technical Support for IBM i -v1 認定 C4040-121 試験問題：
A customer has a single-partition Power 720 running IBM i. They would like to install some additional adapters and implement 5 additional partitions. In addition to installing the adapters and configuring an HMC, what else is necessary?
- A. Modify the existing partition profile to not "use all resources in system" and own only what it
needs. Reactivate the profile.
Create partitions and profiles for the additional partitions. - B. Modify the profile of the existing partition and concurrently enable it.
Resume the existing partition.
Create partitions and profiles for the additional LPARs. - C. Create a new partition and profile for the original LPAR with only the resources the partition
needs. Create partitions and profiles forth additional partitions.
Delete the original partition.
Suspend the existing partition. - D. Configure the new partitions.
Activate the new profiles to remove "required" features of the existing partition.
正解：C 🗳️
In the following example, the VIO Server partitions each provide disk to a client IBM i partition. The client IBM i partition has mirrored the disk presented to it.
Contact with one VIO Server is lost, and the disk it presents to the client shows as "suspended" in IBM i. Once contact has been re-established, what action must the administrator take?
- A. Use System Service Tools to verify and resume mirroring, if necessary.
- B. Run the varyonvg command on theVIOServer providing the failed disk. From System Service Tools, resume mirroredprotection in the client partition.
- C. Recover the disk with the mdadm command on the VIO Server providing the failed disk.
- D. Run the varyonvg command on bothVIOServers.
正解：A 🗳️
Additional SAN disk volumes have been dynamically presented to a VIO Server (VIOS) partition, and these resources need to be mapped to an IBM i partition. In order for these resources to be visible in the VIOS partition, what is the appropriate next step?
- A. As padmin, run cfgmgr in the VIOS partition.
- B. Add an SCSI device in the HMC for the client partition.
- C. Run the cfgdev command in the VIOS partition.
- D. Use the Disk Management function in System Management Services (SMS).
正解：C 🗳️
A customer is implementing a new POWER7 system that will run along with an older POWER5 system.
A new HMC has been purchased for the POWER7 system.
The older 7310-CR3 HMC for the POWER5 system will remain in service.
The customer wants the older 7310-CR3 provide back up to the new HMC.
What must be done prior to implementing the customer's requirements?
- A. Upgrade the POWER5 system firmware to the same fix pack level that the POWER7 system is
running. Upgrade the 7310-CR3 to the latest version of HMC code.
Connect both systems normally to the 7310-CR3 - B. Ensurethe POWER7 ESP is running in "Dual Mode"with the"Activated Level"setto supportthe
POWER7 system and the "Deferred Level"set to support the POWER5 system.
Connect the 731 O-CR3 with the "Deferred Level"password. - C. Connect the new HMC to the POWER7 system and to the LAN.
Use the "Transmit Service Information"dialog on the new HMC to update the 7310-CR3 with the
new HMC code and firmware for the FSP.
Update the firmware on the POWER5 system and connect the new HMC. - D. Consult the HMC / Firmware Supported Combinations chart to obtain the proper firmware/HMC
code levelsimplementthe firmware updates on the POWER5 and 7310-CR3 HMC first,
Connectthe 7310-CR3 to the POWER7 system.
正解：D 🗳️
An administrator is configuring two client IBM i partitions running 7.1 with TR4. Both client partitions are hosted by an IBM i partition running 7.1 with TR4. The managed system is a 4-core Power 720, managed by an HMC. The host partition owns all of the disk in the CEO, the internal LTO-4 tape drive, and the DVD.
How can the administrator share the internal tape drive between the host partition and both client partitions?
- A. Vary off the tape drive on the host partition.
Using the HMO move the adapter from the host partition to either client partition.
Vary on the tape drive on the client partition. - B. Ensure that the 720 has the split backplane, with the disks controlled by the internal RAID
adapter, and the tape andDVD controlled by a second adapter.
Set the second adapterto be desired by all three partitions.
Vary off the tape drive on the host partition.
Using the HMC, move the adapter from the host partition to either client partition.
Vary on the tape drive on the client partition. - C. Set the internal adapter to be desired by all three partitions.
Vary off the tape drive on the host partition.
Using the HMO, move the adapter from the host partition to either client partition.
Vary on the tape drive on the client partition. - D. Vary off the tape drive on the host partition.
Vary on the tape drive on the client partition.
正解：D 🗳️
