IBM A4040-121 問題集 : Assessment: Virtualization Technical Support for IBM i -v1

What type of server and client adapters must be configured on the HMC to support virtualized disk presented from a V7000 SAN to an IBM i client partition?

• A. One SCSI server adapter One ISCSI client adapter
• B. One NPIV server adapter One NPIV client adapter
• C. One vSCSI server adapter One vSCSI client adapter
• D. One Fibre Channel server adapter One Fibre Channel client adapter

An administrator wants to share a fibre attached TS3100 tape library between multiple IBM i 7.1 partitions. The system contains a PC #5774 - 4Gb fibre adapter and uses an IBM fibre switch. All IBM i partitions are hosted by VIO Server (VIOS).
How could the administrator configure the sharing of the tape library?

• A. Create a script that can be called after each backup job in a partition finishes, which will move the fibre adapter to the next partition
• B. In the HMC, select the VIOS partition, then select Operations - Schedule Operations - Options New. Create a new Scheduled Dynamic Reconfiguration operation to move the fibre adapter between partitions.
• C. In the HMC, select the host Power System, then select Operations - Schedule Operations New. Create a new Scheduled Dynamic Reconfiguration operation to move the fibre adapter between partitions.
• D. Configure NPIV within VIOS, then configure each partition to use NPIV to share the tape library.

A system administrator has configured 3 partitions, each using 1 of 3 shared processor pools. All are active and working as designed.
One of the partitions using one of the shared processor pools will be shut down and the resources allocated to the other 2 pools.
Which is the correct sequence of actions to accomplish the goal?

• A. Create a new shared-processor pool.
  Merge all three shared-pools into the new pool using Live Partition Mobility
  Shut down and remove the partition definition.
• B. Shut down the partition that is using the shared processor pool.
  Change the maximum processing units to zero.
  Assign the processor capacityto another pool.
• C. Change the minimum processor for the partition to zero.
  Shut down the partition by deactivating it from the HMC.
  Delete the shared-processor pool.
• D. Merge the shared-processor pool to be removed into one of the other pools.
  Shut down the partition by deactivating it from the HMC.
  Plush the memory cache by deactivating the shared-processor pool.
  Delete the shared-processor pool.

A customer has several client IBM i partitions hosted by a single VIO Server. The system has one Shared Ethernet Adapter. The administrator has noticed that network performance is significantly degrading as traffic increases. The system workload has not changed.
Which statement describes a possible cause of this problem?

• A. There are insufficient vLANs configured to support the network traffic.
• B. TheVIOServer is also hosting vSCSl, and the threading option is disabled on the Shared Ethernet Adapter
• C. Virtual Ethernet is being used instead of physical adapters.
• D. Simultaneous Multi-Threading is enabled but single-threaded workloads are running.

An administrator used IVM to assign a new tape drive to an IBM i partition running on a POWER blade. The administrator verified that the IVM has created the appropriate vSCSl connections between VIO Server and the IBM i partition.
The administrator sees the hardware resource within IBM i, but the associated device description is missing. What is the most likely reason this is occurring?

• A. The resource was not defined to VIO Server as a dynamic adapter.
• B. The devices have not been assigned using the Media Tray Selector button.
• C. The QAUTOCFG system value on the IBM i partition is set to"0"(off).
• D. The hardware resource was not enabled through Virtual Partition Manager.